Mercedes-Benz E-class, Operator'S Manual

Page: 145 / 446

R
The vehicle must be within range of the
garage door or exterior gate drive.
R
The vehicle as well as persons and objects,
are located outside the sweep of the garage
door.
#
Press the programming button on the door
drive unit.
Initiate the next step within approximately
30 seconds.
#
Press programmed button : , ; or =
repeatedly, until the door closes.
% Please also read the operating instructions
for the garage door drive.
Resolving problems when programming the
remote control
#
Check if the transmitter frequency of remote
control : is supported.
#
Replace the batteries in remote control : .
#
Hold remote control : at various angles at a
distance between 1 in (1 cm) to 3 in (8 cm)
in front of the inside mirror. You should test
every position for at least 25 seconds before
trying another position.
#
Hold remote control : at the same angles
at various distances in front of inside mirror.
You should test every position for at least
25 seconds before trying another position.
#
Note that some remote controls transmit
only for a limited period, press button ; on
remote control : again before transmission
ends.
#
Align the antenna line of the garage door
opener unit with the remote control.
% Support and additional information on pro‐
gramming:
R
On the toll free HomeLink ® Hotline on
1-800-355-3515.
R
On the Internet at http://
www.homelink.com
Opening/closing the garage door
Driving and parking 143