Mercedes-Benz E-class, Operator'S Manual

Page: 130 / 446

#
To switch on the power supply: press but‐
ton 1 (USA) or 2 (Canada) once.
You can now activate the windshield wiper,
for example.
The power supply is switched off again if the fol‐
lowing conditions are met:
R
The driver's door is open.
R
You press button 1 (USA) or 2 (Canada)
twice.
#
To switch on the ignition: press button 1
(USA) or 2 (Canada) twice.
The indicator lamps in the instrument cluster
light up.
The ignition is switched off again if one of the
following conditions is met:
R
You do not start the vehicle within
15 minutes.
R
You press button 1 (USA) or 2 (Canada)
once.
Starting the vehicle
Starting the vehicle with the start/stop but‐
ton
Requirements
R
The SmartKey is located in the vehicle and
the SmartKey battery is not discharged.
#
Shift the transmission to position j or i .
#
Depress the brake pedal and push button 1
(USA) or 2 (Canada) once.
#
If the vehicle does not start: switch off non-
essential consumers and press button 1
(USA) or 2 (Canada) once.
#
If the vehicle still does not start: start the
vehicle in emergency operation mode.
Cooling or heating the vehicle interior before
starting the journey
If you start the vehicle via your smartphone, the
previously selected climate control setting is
active.
Before starting, make sure:
R
The legal stipulations in the area where your
vehicle is parked permit engine starting via
smartphone.
R
It is safe to start and run the engine where
your vehicle is parked.
R
The fuel tank is sufficiently filled.
R
The starter battery has been sufficiently
charged.
128 Driving and parking