Mercedes-Benz 2007 CL 550, Operator'S Manual

Page: 183 / 723

182
Control systems
COMAND navigation system (entering a destination)
Entering a destination from the desti-
nation memory
왘
Select “ Navi ” “ Destination ”
“ From Memory ”.
The destination memory list appears ei-
ther with or without the input charac-
ters (
컄
page 183). Whether the input
characters appear depends on the
number of entries in the destination
memory.
Destination memory list with input
characters
When this list appears, the input charac-
ters
4
are automatically activated.
1
Top list entry based on the input data
up to that point
2
Characters entered by the user
3
Characters automatically added by the
system
4
Input characters
5
Currently non-selectable characters
6
Destination memory list
7
Currently selected character
8
Currently selectable characters
While the characters are being selected as
described below, the top list entry
1
al-
ways shows the destination which best
corresponds to the input data as it has
been entered up to that point.
At the same time, COMAND automatically
supplements characters
2
entered by the
user with appropriate characters
3
.
왘
Changing language for the input
characters:
Select
!
.
왘
Select desired language.
왘
Changing character set for the input
characters:
Select
#
.
Depending on the previous setting, you
will change to letters with special char-
acters or to numbers with special char-
acters.
왘
Selecting characters: Slide
o m p
or
rotate
y m z
.
왘
Confirming character selection:
Press
n
.
i
The destination memory always contains an
entry called “My Address”. You can save your
home address, for example, under this entry
(
컄
page 206).
i
In the list of input characters
4
, you can
only select currently selectable characters.
Which characters are included depends on the
sequence in which you have entered your desti-
nation and the content of the destination memo-
ry.