Mercedes-Benz 2007 CL 550, Operator'S Manual

Page: 191 / 723

190
Control systems
COMAND navigation system (Point of interest entry)
Main category list with input characters
When this list appears, the input charac-
ters
5
are automatically activated.
1
Top list entry based on the input data
up to that point
2
Characters entered by the user
3
Characters automatically added by the
system
4
Symbol for available POIs or other
available subcategories
5
Input characters
6
Currently non-selectable characters
7
Currently selectable character
8
Currently selected character
9
Main category list
While the characters are being selected as
described below, the top list entry
1
al-
ways shows the category which best corre-
sponds to the input data as it has been
entered up to that point.
At the same time, COMAND automatically
supplements characters
2
entered by the
user with appropriate characters
3
.
왘
Selecting characters: Slide
o m p
or
rotate
y m z
.
왘
Confirming character selection:
Press
n
.
왘
Deleting individual characters:
Select
)
in the bottom line and
press
n
.
왘
Deleting an entire entry: Select
)
in
the bottom line and press
n
until the
entire entry is deleted.
왘
Canceling an entry: Select “ Back ” in
the bottom line and press
n
.
or
왘
Press back button
L
in the center
console (
컄
page 82).
As soon as COMAND can clearly attribute
the characters entered to a category, the
input characters
5
disappear.
You see the list of main categories without
the input characters. Here you can confirm
the current entry or make another selec-
tion.
You can also manually switch to the main
category list without input characters at
any time.
왘
Switching manually to the main cat-
egory list without input characters:
Slide
q m
.
or
왘
Select
?
in the second line from the
bottom and press
n
.
i
In the list of input characters
5
, you can
only select currently selectable characters.
Which characters are included depends on the
sequence in which you have entered your desti-
nation and the data version of the digital map.