Mercedes-Benz 2007 CL 550, Operator'S Manual

Page: 231 / 723

230
Control systems
COMAND system settings
Starting new individualization
왘
Select “ Vehicle ” “ System Settings ”
“ Voice Control ” “ Start new indi-
vidualization ”.
A prompt appears asking whether you
would like further information.
왘
Select “ Yes ” or “ No ”.
If you select “ No ”, the first part of indi-
vidualization begins.
If you select “ Yes ”, an information dis-
play will be shown with audio instruc-
tion.
왘
Closing display: Select “ OK ”.
The first part of individualization be-
gins.
At the end of the first part, you will see
a prompt asking whether you want to
begin the second part.
왘
Select “ Yes ” or “ No ”.
If you select “ No ”, individualization will
be canceled. The data from the first
part is saved automatically.
If you select “ Yes ”, the second part be-
gins.
Individualization is completed at the end of
the second part. You will see a message to
this effect. The data from the second part
is saved automatically.
Canceling during the first or second part
of individualization
왘
Select “ Cancel ”.
A prompt appears asking whether you
really do want to cancel.
왘
Select “ Yes ” or “ No ”.
If you select “ Yes ”, individualization will
be canceled. The data from the part at
which you exited is not saved.
If you select “ No ”, the part at which you
stopped begins again.
Deleting existing individualization data
왘
Select “ Vehicle ” “ System Settings ”
“ Voice Control ” “ Delete individu-
alization ”.
A prompt appears asking whether you
really do want to delete.
왘
Select “ Yes ” or “ No ”.
The individualization data will either be
deleted or not, depending on your se-
lection.
i
It is only possible to start individualization
with the vehicle stationary. After starting the
session, the system will guide you through the in-
dividualization by means of acoustic instruc-
tions.