Mercedes-Benz 2007 CL 550, Operator'S Manual

Page: 272 / 723

271
Control systems
Instrument cluster control system
Settings menu
In the “ Settings ” menu, you can:
앫
switch the daytime running lamps on or
off (USA only)
앫
switch the additional speedometer on
or off
앫
switch the radar sensors* on or off
(USA only)
Setting daytime running lamp mode
(USA only)
왘
Press
(
or
&
to select the “ Set-
tings ” menu.
왘
Press
%
or
$
to select the “ Day-
time driving lamps ” function.
왘
Press
#
.
왘
Press
#
again if you would like to
change the current status.
Depending on the previous status, the
daytime running lamps will be switched
on or off.
With “ Daytime driving lamps ” mode select-
ed and the exterior lamp switch at position
M
or
*
, the low beam headlamps
are switched on when the engine is run-
ning.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
앫
Parking lamps
앫
Tail lamps
앫
License plate lamps
앫
Side marker lamps
For more information on the daytime run-
ning lamp mode (
컄
page 365).
Showing or hiding additional speedom-
eter
You can have an additional digital speed-
ometer shown on the multifunction dis-
play. The speed is shown in the unit of
kilometers/hour (USA) or miles/hour
(Canada).
왘
Press
(
or
&
to select the “ Set-
tings ” menu.
왘
Press
%
or
$
to select the “ Add.
speedometer ” function.
왘
Press
#
.
왘
Press
#
again if you would like to
change the current status.
Depending on the previous status, the
additional speedometer will be
switched on or off.
i
The menu overview can be found on
(
컄
page 258).
i
This function is not available in countries
where the daytime running lamp mode is manda-
tory and therefore in a constant mode.
i
If you turn the exterior lamp switch to anoth-
er position, the corresponding lamp(s) will
switch on.
i
Make sure that the light switch is set
to
B
or
*
when you switch off the day-
time running lamps while driving at night.