19
a) Calling Clock Relay Functions
❍
For this you first call the
Chef Menu,
then you
select select the
"Operation Parameters"
and
then the sub-menu
"General"
.
❍
Now you select the function
"Clock Relay"
.
Here, you find the selection items
"Mode"
and
"Switching Times".
b) Activating/Deactivating the Timer Function
After calling the selection item "Mode" you can either
activate (ON) or deactivate (OFF) the timer function.
Warning:
The timer function must not induce you to
have the machine operating unattended - rather, the
operator shall only be relieved of constantly monito-
ring the start time.
c) Setting the switching times
After calling the selection item
"Switching Times"
you can program three switching on times and three
switching off times; - also the three switching time for
each day of the week on which it is to become
effective.
❍
Select the time for switching on or off ("On / Off
1-3"), which you want to change.
❍
Now you can use the keys
% &
in order to
select the items
to be changed
❍
and the ke + – for
changing the value.
Proceed successively through the items for time
and week days
❍
When you press the key
9
(Reset), you
simultaneously deactivate all week days. The
week days
are ...
–
activated,
when you set them to
"1"
;
–
deactivated,
when you set them to
"0".
❍
When you press the key
8
(Enter), the
settings
will be adopted.
❍
By pressing the key
4
(Esc), you can
quit this
menu
without adopting any changes.
Finally, do not forget to turn the key switch back to the
left and to close the door of the device (
quit the Chef
Menu
).
d) Prematurely Switching on the machine
When the machine is set to "Standby" mode, you can
switch it on again prematurely,
❍
by calling the function
"ON/OFF"
as contained in
the Chef Menu (cf. chapter 12).
The switch over process into standby
mode is still active
The machine is switched to standby,
but time and date are invalid. There-
fore, an automatic switch-on is not
possible.
The machine is switched to standby,
but there is no valid switch-on time
(e.g., clock relay is deactivated).
Automatic switch-on is not possible.
The reservoir is in the process of
evacuation (Evacuation of warm
reservoir).
GB
Ausgedruckt von Pressworks.
16:58 01.06.105
Datei 12-25.DTP, Seite 8.
