9
❍
Never open any housing parts or covers
un-
less instructed to do so. There are no operating
elements inside.
There can be a danger of electrocution or other
injury from hot or moving parts.
❍
Protect the machine from moisture!
There can
be a danger of electrocution if water makes
contact with any machine parts other than those
expressly intended for this purpose. In particular,
you must not ...:
– operate the machine
outdoors
–
spray the machine with water
–
spray the installation area
, e.g. with a water
pipe or high-pressure cleaner.
➁
Do not continue to use the machine if damage
is evident or recognizable mal-functions
occur
. In such cases, important safety functions
may be disturbed. First have the machine
inspected, and repaired where necessary, by our
Technical Service staff, e.g.
– if the
housing
is damaged or the
door
does
not close properly,
– if the
mains cable
or
mains plug
is damaged
or the electricity supply is regularly interrupted
by the
fuse
,
– if
water
leaks out of the machine,
– if
error messages
appear on the display or
the machine does not operate as usual,
– if
unusual smells
are noticed or the machine
housing becomes hot. (During normal
operation the housing is only warm to the
touch).
In all the above cases, remove the plug
from
the power socket and turn the water off. Then
contact our Technical Service staff.
❍
Observe all cleaning, inspection and
maintenance intervals,
as stated in the manual.
The machine´s safety concept can only work if all
parts are kept clean and parts subject to wear
and tear are replaced early enough. Otherwise,
the safety, correct functioning and durability of the
machine may be impaired.
+
➀
GB
Ausgedruckt von Pressworks.
14:16 01.06.105
Datei 04-11.DTP, Seite 6.
