18
14. Clock Relay (Timer Function)
When time and date are set with valid values as
described above, you can also have the machine
switched on and off by means of timer control.
However, this will only work unless
–
you have
not switched off
the machine by
means of the mains switch; rather, it should be
–
set to standby mode by means of the function
"ON/OFF"
as contained in the Chef Menu.
13. Time and Date
This function serves to set time and date.
❍
To do so, you first call the
Chef Menu,
select the
"Operation Parameters"
and then the sub-menu
"General".
❍
Now you either select the function
"Set Time "
or
"Set Date "
- depending on what you want to set.
❍
Now you can use the keys
% &
. in order to
select the items
to be changed ...
❍
and the keys + – for
changing the value.
❍
When you press the ke
Enter
, the clock will
start
with the newly set times.
➀
In the lower part of the display the date and time
of the next
switching on
process will be shown,
–
if the
clock
is set and
switching times
are
programmed as described on this page and ...
–
if the
timer function is activated
and
–
has been set to standby mode by means of the
function "ON/OFF".
➁
In the lower part of the display the date and time
of the next
switching off
process will be shown,
–
if the
clock
is set and
switching times
are
programmed as described on this page and ...
–
if the
timer function is activated
and
–
has been set to (run in)
normal operation
mode.
➀
➁
We 20:00
We 20:00
GB
Ausgedruckt von Pressworks.
16:58 01.06.105
Datei 12-25.DTP, Seite 7.
