MELAG Vacuklav 24 B+ Technical Description Download Page 48

Page: 48 / 57

Chapter 9 – Errors

Warning message

Possible causes

What you can do

Electric power supply of the printer
is interrupted

Ensure electric power supply, the red LED "P" at
the log printer MELA

print

42 must light red

Printer is "offline"

Set printer to "online" (press key "SEL" at the
MELA

prin

42, LED "SEL" must light green)

Printer memory full

The device-internal log memory is
allocated (max. 40 logs possible).

The message is shown at the start of a program.

Repeatedly press the K

(S) to delete the

message, and the program starts. The oldest low
is then deleted.

A printer/ computer/ CF Card
Writer is registered and in the
menu

Function: Print

the

option

Immediate printout

is set.

Set printer to

Immediate printout Yes

(see

page 32,

Automatic immediate output logfiles

Delete printer memory (see page 34,

Delete

stored logfiles

), possibly print all saved logs

beforehand (see page 34,

Print all stored

logfiles

Release the printer in the menu

File

transmission

and set the option

No printer

Execute Service

The servicing message is
activated, the device has reached
the prescribed

→

batches or

number of years has expired

The message is shown at program start.

Repeatedly press the K

(S) to delete the

message, and the program starts.

Carry out maintenance with MELAG customer
service or service of the specialist trade

NOTICE:

Service counter is reset by the customer

service

Test not successful

Leakage rate: 3.2

The leakage rate determined by
the vacuum test lies above the
maximum permissible value of
1.3 mbar.

Door seal, chamber flange is
contaminated

Check door seal and chamber flange for
cleanliness, possibly clean
Check door seal for damage, possibly exchange,
see page 37,

Chapter 6 – Maintenance

Door seal wrongly inserted

Check door seal for correct seating

Repeat vacuum test with completely cold device

Warning! Battery dead

The monitoring of the device's
internal battery voltage has
determined a too low voltage
value.

The battery must be exchanged by MELAG
customer service or service of the specialist trade

Summary of Contents for Vacuklav 24 B+


























































Search results

Summary of Contents for Vacuklav 24 B+

Reviews:

MELAG Vacuklav 24 B+, Technical Description, Page: 48 / 57

Search results

Summary of Contents for Vacuklav 24 B+

Reviews: