45
Chapter 9 – Errors
In this chapter you learn
Which type of messages exist
What you should do in case of errors
What you can do before calling the Hotline
What you can do if no display appears
What you can do when the feed water consumption is too high
What you can do if there are bad drying results
A warning is not an error
Not all messages which appear on the
→
display are error messages.
Warning messages
Warning messages are displayed when necessary. Warning messages
are not error messages. They help to ensure smooth operation and to
recognize undesirable conditions. Observe these warning messages
promptly in order to avoid errors.
Error message
Error messages are displayed if safe operation or sterilization security is
not guaranteed.
These can appear on the
→
display shortly after switching on the autoclave
or while a program is running.
The program is aborted if a malfunction occurs during a program run.
Danger of infection!
■
If a program is aborted during the sterilization phase, the load is
unsterile. Repackage and repeat the sterilization for the respective
→
items to be sterilized.
Non-observance endangers the health of your patients and the
practice team.
The error message is then shown on the display. in alternation with the
current program phase (pressure discharge,
Ventilation
or
End
) After
the program abort or termination, the error message is shown on the
display in alternation with the message
acknowledge with button "-
"
and
Program stopped
. In order to delete the error message, press the
K
EY
(-).