MELAG Vacuklav 24 B+ Technical Description Download Page 3 | Manualshive

Page: 3 / 57

MELAG Vacuklav 24 B+ Technical Description Download Page 3

Foreword

Thank you for deciding to buy this Pro Class MELAG autoclave.

This Technical Description describes both the autoclaves Vacuklav

®

24 B+

and Vacuklav

®

30 B+. They are identical except for their chamber depth

and device depth.

Device name

The device name "autoclave" is used in this Technical Description to
designate the steam sterilizers Vacuklav

®

24 B+ and Vacuklav

®

30 B+.

Technical Description

The Technical Description contains important safety instructions and
information which you need to operate the autoclave. Read these
instructions carefully and thoroughly in proper sequence.

Avoid dangers

Please read all the safety instructions attentively before using the
autoclave.

About this manual

Symbol

Meaning

Explanation

Danger!

Risk to health

Indicates a dangerous situation which if not avoided
could entail slight to life-threatening injuries.

Warning!

Observe

without fail

Indicates a dangerous situation which if not avoided
could entail damage to the instruments, the practice
equipment or the autoclave.

Important

information

Indicates important information.

Example of emphasis

Meaning

Explanation

→

Conductivity

measurement

Glossary entry

Words or phrases marked with an arrow are
explained in the glossary. The glossary is listed
alphabetically. It can be found at the end of this
manual.

Universal program

Software

citation

Words or phrases appearing on the

→

display of the

autoclave are marked as software citations.

Chapter 6 – Logging

Cross-

reference

Reference to another text section within this
Technical Description.

Figure 1/(5)

Cross-

reference

Reference to a detail in a figure – in the example, to
Part No. 5 in Figure 1.

«
1
2
3
4
5
...
»

Summary of Contents for Vacuklav 24 B+


























































Reviews:

No comments