MELAG Vacuklav 24 B+ Technical Description Download Page 34

Page: 34 / 57

Chapter 5 – Logging

program. The display shows

Printout

After finishing the printout the display again shows

Print stored

cycles

in case you would like to leave the submenu without printing, press
the K

(S).

NOTICE:

A termination

during

the printing is only possible by disconnecting the

instrument at the mains switch or interrupting the power supply of the
printer.

In order to leave the menu, likewise press the K

(S). The display

shows the setup menu

Function: Print

By again pressing the K

(S), you completely leave the menu and

return to the starting position of the display.

Delete stored logs

In order e.g. to suppress the warning text

Printer memory full

for

preset option

Immediate printout No

, the saved logs can be

manually deleted.
In the following example you can read how you can delete all saved logs.

Program

Start-Stop

Select the SETUP Menu

Function

by short simultaneous pressing

of the keys (+) and (-).
The display shows

Function: Print.

Press the K

(P). The Menu

Print – File transmission

displayed.

Navigate with the K

(+) or (-), until the display shows

Delete all cycles

Press the K

(P) in order to delete all logs now.

In order to cancel the submenu without deleting, press the K

(S).

In order to leave the menu after deletion, press the K

(P). The

display shows

Function: Print

By again pressing the K

(S), you completely leave the menu and

return to the starting position of the display.

Display printer memory

Program

Start-Stop

With a connected and initialised printer you can verify how many logs are
already saved in the log memory of the autoclave.

Proceed as follows:

Select the SETUP Menu

Function

by short simultaneous pressing

of the keys (+) and (-).

The display shows

Function: Print

Navigate with the K

(+) or (-), up to the display for the Storage

Occupancy (see left Display Figure) are shown.

Press the K

(P), in order in to reach the submenu

Print - File

Transmission

With the K

(+) or (-) navigate until you see the current storage

occupancy on the display.

In order to leave the menu again, press the K

(S) twice.

Summary of Contents for Vacuklav 24 B+


























































Search results

Summary of Contents for Vacuklav 24 B+

Reviews:

MELAG Vacuklav 24 B+, Technical Description, Page: 34 / 57

Search results

Summary of Contents for Vacuklav 24 B+

Reviews: