MELAG Vacuklav 24 B+ Technical Description Download Page 31

Page: 31 / 57

Chapter 5 – Logging

Initialisation of the log

printer

MELAprint

In order to be able to print out logs on the connected log printer, you must
initialise MELA

print

42 once by making the following setting at the

autoclave:

If the autoclave is still not switched on, switch it on.

Wait until the display shows the basic settings (page 12,

Control

Panel

)

Select the SETUP Menu

Function

by short simultaneous pressing

of the keys (+) and (-).
The display shows

Function: Print

Press the K

(P). to select the submenu

Printing – File transmission

Press the K

(P) again. The display shows

File transmission – No printer

, in case no printer was yet

selected.

Navigate with the K

(+) or (-), until the display

shows

File transmission – External printer

For confirmation press the K

(P). The display changes back to the

Print – File transmission

Press the K

(S), in order to return to the menu

Function: Print

After renewed pressing of the K

(S) the display again shows the

initial state.

Test printouts on the

log printer

MELAprint

In order to verify the functional reliability of the log printer MELAprint

and its communication with the autoclave, a test printout can be carried
out:

Select the SETUP Menu

Function

by short simultaneous pressing

of the keys (+) and (-).
The display shows

Function: Print

Press the K

(P) to select the submenu

Print – File

transmission

is displayed.

Navigate with the K

(+) or (-) until the display

Test printout

shown.

In order to start the printout, press the K

(P).

An appropriate display with

Printout

appears.

In order to break cancel the test print or leave the menu after finished
printout, press the K

(S). The display shows

Function:

Printout

By again pressing the K

(S), you completely leave the menu and

return to the starting position of the display.

Summary of Contents for Vacuklav 24 B+


























































Search results

Summary of Contents for Vacuklav 24 B+

Reviews:

MELAG Vacuklav 24 B+, Technical Description, Page: 31 / 57

Search results

Summary of Contents for Vacuklav 24 B+

Reviews: