Chapter 3 – Initial start-up
17
Insert power plug into the
socket
Plug the power plug into the socket.
Prerequisites for initial start-up
The following prerequisites must be satisfied for initial start-up:
The cooling water inlet for the vacuum pump must be open.
The feed water supply must be secured.
The power supply of the autoclave must be assured.
Record of installation and setting up
NOTICE:
As documentation of proper setting up, installation and setting up as well
as for your warranty claim, the record of installation must be filled out by
the person responsible and a copy sent to MELAG.
Switch on autoclave
Switch on mains
Turn the mains switch on to power the autoclave (page 10,
Fig. 1/(4)
.
After switching on
After switching on the autoclave with the mains switch, the
→
display
shows the message
Please wait – door unlocking
. Then the
display changes to the initial state shows the time.
Before initial start-up, removed the trays and accessories from the
chamber .