MELAG Vacuklav 24 B+ Technical Description Download Page 30 | Manualshive

Page: 30 / 57

MELAG Vacuklav 24 B+ Technical Description Download Page 30

Chapter 5 – Logging

30

Set date and time

Observe time re-settings

Date and time of the autoclave must be correctly set for proper batch
documentation. Observe the time re-settings in autumn and spring
("daylight saving time"), since this is not reset automatically. Set date and
time as described below:

Select the SETUP Menu

Function

by short simultaneous pressing

of the

KEYS

(+) and (-).

The display shows

Function: Print

.

Navigate with the K

EY

(+) or (-) in the Menu

Function

, up to the

display

Function: date/ time

are displayed.

Press the K

EY

(P) in order to confirm. The current hour is displayed.

Select between the following setting possibilities with the K

EY

(+)

or (-): Hour, minute, second
Day, month, year

In order to adjust the

hour

parameter, press the K

EY

(P) for the

confirmation.

The current value on the display blinks.

The value can be increased or reduced with the

KEYS

(+) and (-).

In order to store the value, confirm with the K

EY

(P).

The current preset value on the display no longer blinks

In order to adjust the other parameters, proceed analogously.

After finishing the settings, press the K

EY

(S) in to leave the menu

On the display, the

Function: Date/Time

are again displayed

By pressing the key (S) again you leave the menu completely and the
display again shows its starting position.

Use printer as output medium

If you want to employ the printer MELA

print

®

42 as the output medium,

connect it to the autoclave as follows:

Data connection

from the autoclave

Open the white cover of the serial data- and printer connection (see page
10,

Fig. 1/ (6)

):

(1)

(2)

Connect printer

Turn a coin by a quarter-revolution inserted in the locking slot (1) on
the white cover.

Take cover off and fold the interior metal casing to the left.

Press the metal casing somewhat downwards until it engages and no
longer can automatically flip back.

Connect the cables of the log printer to the printer connection at the
autoclave.

If the printer or a computer is continually connected to the autoclave, the
data connection cable of the log printer is laid in the cable ducts (2), the
metal casing retracted and the cover is closed again. This provides a
comfortable external cable connection to the printer.

Close the log printer MELA

print

®

42 according to the pertinent operating

manual.

«
...
28
29
30
31
32
...
»

Summary of Contents for Vacuklav 24 B+


























































Reviews:

No comments