Megger MTR105 User Manual Download Page 27

Page: 27 / 100

4. The display will show the selected voltage, in this case 500 V.

5. Press soft keys 2 and 3 to move the carousel left or right

through sub-modes to PI (Polarization Index).

NOTE:

The full title text of the sub-mode will appear in the

secondary field for a few seconds.

6. To start the test press the TEST button.

The test will start and the clock will appear in the bottom left of
the primary screen. The test will continue for 10 minutes. The
clock will countdown the test. An interval result will appear after
1 minute.

A warning triangle will flash on screen.

NOTE:

The test can be stopped at any time by pressing the TEST

button.

7. During the tests,

The primary field displays the test results.

The secondary field displays actual voltage output and the
current measured.

8. When the test has completed,

The primary field displays the test results.

Insulation Resistance Tests

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands