Megger MTR105 User Manual Download Page 41

Page: 41 / 100

4. The test current can be toggled between 200 mA and

20 mA pressing soft key 1.

5. NULL the test leads by touching the two test probe ends.

Press the TEST button until the NULL (symbol) appears on the
screen. The ohmic value on the primary screen will read 0 Ω.

6. Connect the test leads to the unit under test.

NOTE:

The connection is for illustrative purposes only showing

winding resistance across phase 1.

7. This test starts automatically.
8. During the tests,

The primary field displays the result of the true resistance
of the unit under test

The secondary field displays the test current and the
resistance values in both directions - highest value shown
in Primary.

The test in bi-direction mode runs continually

Continuity

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands