Megger MTR105 User Manual Download Page 60

Page: 60 / 100

10. Temperature measurement

Thermocouple connected, type “T” is set as default, the MTR105 can also be configured for “J” and “K” type
thermocouples.

Before an insulation resistance test can be carried out with temperature compensation enabled a temperature
measurement must be carried out to establish the temperature of the unit under test.

1. Temperature measurement screen will display O/C when the

thermocouple is not detected and there is not a previous
temperature measurement reordered.

2. Two options are displayed:

2.1. Connect the thermocouple for an accurate temperature

measurement.

2.2. Press soft key 4 for a manual temperature

measurement.

10.1 Thermocouple temperature measurement

1. Connect the thermocouple test leads to the MTR105.

1.1. Press the Information (

) button to view the lead set

up diagram.

NOTE:

When the diagram is displayed a test cannot be

performed. Press Information

(

)

button to return to the test

screen.

NOTE:

The thermocouples are sensitive to polarity.

2. Turn rotary switch to select the Thermometer position.

Temperature measurement

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands