Megger MTR105 User Manual Download Page 51

Page: 51 / 100

5. Press soft key 1 to enable auto mode.
6. If there is a continuity reading detected for C and P

connections the secondary fields will display with a tick and
background will be green.

7. If all the leads are connected correctly, test will start

immediately, runs for a few seconds and then automatically
stop.

8. During the tests,

The primary field displays a rotating circle to show a test
is underway

The secondary field displays the continuity on the Current
(C1-C2) and potential (P1-P2) circuits

9. When the test has completed,

The primary field displays the result for current and
resistance in each direction and an average of the two.

The secondary field displays the continuity on the Current
(C1-C2) and potential (P1-P2) circuits.

10. The result can be saved by pressing the SAVE button. A

message will inform you the data was saved and which asset
ID it was saved to.

11. To restart the test, re-connect to a new test piece and the

test will start automatically.

DLRO Digital Low Resistance Ohmmeter

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands