Megger MTR105 User Manual Download Page 24

Page: 24 / 100

If the temperature reading is more than 30 minutes old, a red
time stamp will be displayed in the secondary field above the
temperature reading.

4.5 3 Phase (3P)

1. Connect the test leads to the MTR105.

1.1. Press the Information (

) button to view the lead set

up diagram.

NOTE:

when the diagram is displayed a test cannot be

performed. Press Information

(

)

button to return to the test

screen.

2. Connect the test leads to the unit under test.

NOTE:

The connection is for illustrative purposes only

When performing phase to phase measurements, the star or
delta configuration has to be disconnected.

3. Select the required insulation test voltage.

4. The display will show the selected voltage, in this case 500 V.

Insulation Resistance Tests

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands