Megger MTR105 User Manual Download Page 57

Page: 57 / 100

6. To start the test press the TEST button.

The MTR105 determines if the load is inductive, capacitive or
resistive automatically.

7. During the tests,

The primary field displays a rotating circle to show a test
is underway.

The secondary field displays the frequency.

8. During the tests,

The primary field displays the result for the reactive
component. (This could be capacitance, inductance or
resistance).

The secondary field displays the frequency.

9.3 LCR Calibration

NOTE

For full MTR105 re-calibration procedure refer to

Refer to 18. Calibration, Repair and Warranty on page 84.

1. Inductance calibration can be accessed from any sub-mode

within the LCR family by pressing soft key 4.

Inductance (L); Capacitance (C); Resistance (R) (LCR)

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands