Megger MTR105 User Manual Download Page 54

Page: 54 / 100

9. Inductance (L); Capacitance (C); Resistance (R) (LCR)

NOTE:

Results of measurements can be adversely affected by impedances of additional operating circuits connected

in parallel or by transient current.

9.1 Auto

1. Connect the test leads to the MTR105.

1.1. Press the Information (

) button to view the lead set

up diagram.

NOTE:

When the diagram is displayed a test cannot be

performed. Press Information

(

)

button to return to the test

screen.

2. Connect the test leads to the unit under test.

NOTE:

The connection is for illustrative purposes only showing

connection across phase 1.

3. Turn rotary switch to select the LCR position.

4. Press soft keys 2 and 3 to move the carousel left or right

through sub-modes to auto capacitance / inductance test.

NOTE:

The full title text of the sub-mode will appear in the

secondary field for a few seconds.

Inductance (L); Capacitance (C); Resistance (R) (LCR)

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands