Megger MTR105 User Manual Download Page 30

Page: 30 / 100

9. The result can be saved by pressing the SAVE button.

A message will inform you the data was saved and which
asset ID it was saved to.

10. To restart the test pressing the TEST button again.

4.8 Dielectric Absorption Ratio (DAR)

1. Connect the test leads to the MTR105.

1.1. Press the Information (

) button to view the lead set

up diagram.

NOTE:

when the diagram is displayed a test cannot be

performed. Press Information

(

)

button to return to the test

screen.

This test can also be performed with just the red and the black
lead.

2. Connect the test leads to the unit under test.

NOTE:

The connection is for illustrative purposes only.

When performing phase to phase measurements, the star or
delta configuration has to be disconnected.

3. Select the required insulation test voltage.

Insulation Resistance Tests

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands