Megger MTR105 User Manual Download Page 29

Page: 29 / 100

4. The display will show the selected voltage, in this case 500 V.

5. Press soft keys 2 and 3 to move the carousel left or right

through sub-modes to T(s) (Timed Test).

NOTE:

The full title text of the sub-mode will appear in the

secondary field for a few seconds.

6. To start the test press the TEST button.

The clock will appear in the bottom left corner of the primary
field. The Timed test is user configurable and can run for
1,2,3,4,5,6,7,8,9, or 10 minutes

Refer to 14.1.6 Timed Insulation

on page 73

A warning triangle will flash on screen.

NOTE:

The test can be stopped at any time by pressing the TEST

button.

7. During the tests,

The primary field displays the test results.

The secondary field displays actual voltage output and the
current measured.

8. When the test has completed,

The primary field displays the test results.

The secondary field displays actual voltage output and the
current measured.

Insulation Resistance Tests

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands