Megger MTR105 User Manual Download Page 25

Page: 25 / 100

5. Press soft keys 2 and 3 to move the carousel left or right

through sub-modes to 3P (3 phase).

NOTE:

The full title text of the sub-mode will appear in the

secondary field for a few seconds.

6. To start the test press the TEST button.

A warning triangle will flash on screen.

NOTE:

The test can be stopped at any time by pressing the TEST

button.

7. During the tests:

The primary field displays the test results and the active
and completed phase to phase tests in the three phase
sequence.

The secondary field displays actual voltage output and the
current measured.

8. When the test has completed:

The primary field displays the test results and also the
actual voltage output and the current measured.

Insulation Resistance Tests

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands