Megger MTR105 User Manual Download Page 39

Page: 39 / 100

5. A new screen will open where the threshold can be adjusted

pressing soft keys 2 and 3.

6. Press soft key 4 to save and return to the original screen.

OR
Press soft key 1 to cancel and return to the original screen.

7. Press soft keys 2 and 3 to move the carousel left or right

through sub-modes to uni-direction

NOTE:

The full title text of the sub-mode will appear in the

secondary field for a few seconds.

8. The test current can be toggled between 200 mA and

20 mA pressing soft key 1.

9. NULL the test leads by touching the two test probe ends.

Press the TEST button until the NULL (symbol) appears on the
screen. The ohmic value on the primary screen will read 0 Ω.

10. Connect the test leads to the unit under test.

NOTE:

The connection is for illustrative purposes only showing

winding resistance across phase 1.

Continuity

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands