Megger MTR105 User Manual Download Page 35

Page: 35 / 100

5.2 AC or DC

1. Connect the test leads to the MTR105.

1.1. Press the Information (

) button to view the lead set

up diagram.

NOTE:

When the diagram is displayed a test cannot be

performed. Press Information

(

)

button to return to the test

screen.

2. Turn rotary switch to select Voltmeter (V) position.

3. Press soft keys 2 and 3 to move the carousel left or right

through sub-modes to ac or dc as required.

NOTE:

The full title text of the sub-mode will appear in the

secondary field for a few seconds.

4. The ac and dc tests start automatically.
5. During the ac tests,

The primary field displays the measured voltage.

The secondary field displays frequency.

6. During the dc tests,

The primary field displays the measured voltage.

Voltmeter

www.megger.com

Summary of Contents for MTR105





































































































Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands

Megger MTR105, User Manual

Search results

Summary of Contents for MTR105

Reviews:

Related manuals for MTR105

Brands by name

Popular brands