Medivance Arctic Sun 2000, Service Manual

Page: 22 / 85

18
Remote Display
Figure 4.1
Removing Rubber Plug
Figure 4.2
4.3 Adjust Remote Display Clamp
Tools and Supplies Required:
ƒ 1/2” hex key.
The Remote Display clamp tension may need adjusting over time.
1. Remove the Remote Display from the handle. Disconnect the
Remote Display Cable.
2. Loosen the clamp knob until the bottom jaw swings clear of the
top head. Remove the black rubber plug in the top head by
grabbing an edge and pulling straight out.
3. Using a ½” hex key, adjust the hex bolt until proper tension is
achieved. Replace the plug and tighten the clamp knob.
Adjusting Tension
Figure 4.3
4.4 Inspect Connectors and Cables
Inspect all cables for breakage, fraying, excessive twisting or other signs of damage. Replace
damaged cables.