Maytag Commercial MYR20, Service Manual

Page: 68 / 88

4-44
1. Remove the front panel (See page 4-32).
2. Remove the ornament panel
(See page 4-35).
3. Mark the outer tub and tub cover for proper
orientation during reassembly.
4. Loosen the 13mm hex nut on the top tub
cover clamp until finger tight.
5. Loosen the 13mm hex nut on the bottom
tub cover clamp until finger tight.
6. Remove the tub cover and clamp.
7. Install a two arm gear puller in the weep
holes of the bearing house.
8. Use a bolt with centering hole so the gear
puller will not slip.
9. Drive the basket forward, pushing the shaft
through the bearings in the bearing house.
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before
operating.
BearinG anD BaSKeT repLaCeMenT -
preFerreD MeTHOD
13mm
Hex Nut
Tub Cover
Clamp
Tub
Cover
Excessive Weight Hazard
Use two or more people to lift and
move basket.
Failure to do so can result in back
or other injury.