Maytag Commercial MYR20, Service Manual

Page: 56 / 88

4-32
1. To remove the front panel, remove the toe
panel (See page 4-30).
2. Remove the T-30 screw from the front lower
left corner of the front panel.
3. Remove the T-30 screw from the front lower
right corner of the front panel.
4. Grasp the bottom corners of the front panel.
Pull forward and down slightly to remove the
front panel from the washer.
5. There are locating pins at the top and
bottom of the side panels that fit into holes
in the front panel.
6. Components accessible after removing the
front panel include the door lock, ornament
panel, and the cover for the heaters.
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before
operating.
FrOnT paneL
Left T-30
Screw
Right T-30
Screw
Heater
Cover
Ornament
Panel
Door
Lock