Maytag Commercial MYR20, Service Manual

Page: 61 / 88

4-37
1. To remove the lower back panel, remove
the back panel (See page 4-36).
2. Loosen two T-30 screws at the bottom of
the panel, attached to the base of washer.
3. Remove two T-20 screws securing the
drain-T to the lower back panel.
4. Remove four T-30 screws, two on each
side, securing the lower back panel to the
side panels.
5. Lift the panel up from the bottom and move
it back away from washer to remove panel.
Electrical Shock Hazard
Disconnect power before servicing.
Failure to do so can result in death or
electrical shock.
Replace all parts and panels before
operating.
LOWer BaCK paneL
Two T-30
Screws
Two T-20
Screws
Four T-30
Screws