32
Exterior 1200 Wash user manual
5.1 Luminaire settings
This section describes how to set up luminaires for either:
• single fixture stand-alone operation, in which individual luminaires run programmed light
shows independently,
• synchronized stand-alone operation, in which one master luminaire sends signals to
slave luminaires on a data link so that light shows are synchronized, or
• DMX operation, in which luminaires on a data link are controlled remotely using a DMX
control device.
There are three ways to set up luminaires:
MUM (Multi-
Utility
Manager)
The Martin MUM (Multi-Utility Manager) is a PC software
application available from Martin Architectural in a set
(P/N 90758090) that also includes a DABS1 interface
adaptor and suitable cables. The set allows a PC to be
connected to a luminaire via a data link or RJ-45 service
socket.
We recommend MUM because it provides an intuitive,
easy-to-use, graphical user interface.
Note that MUM can only be connected to, and set up,
one luminaire at a time.
Setup using MUM is described in "
Martin MP-2
Uploader
The Martin MP-2 Uploader can be loaded with the
luminaire’s software, available from the Martin
Architectural website, and then connected to the
luminaire.
When working with multiple luminaires, the MP-2 allows
you to apply the same settings to all the luminaires on a
data link.
The MP-2 has a text-based interface and the luminaires
do not provide feedback to the uploader. Therefore, the
current settings of the luminaire can only be “read” by
observing the behavior of the luminaire.
Using the MP-2 is described in "
Onboard
control
panel
The onboard control panel is a convenient way of
configuring a luminaire with no external equipment, but
access to the luminaire is required.
Setup using the control panel is described in "
Summary of Contents for Exterior 1200 Wash
