Martin Exterior 1200 Wash, User Manual, Page: 44 / 84

44 Exterior 1200 Wash user manual
6 . 2 . 2 S t a n d - a l o n e s e t t i n g s
First, the luminaire needs to be configured to know if and when to activate a stand-alone
program:
Click Stand-alone settings to display the window below.
The following options are available:
Stand-alone
operation Activates or deactivates stand-alone operation. If enabled,
stand-alone operation will start automatically when the
luminaire is powered on, or the luminaire is being controlled
by DMX and the DMX control signal disappears.
Synchronized Sets the luminaire to one of the following modes:
Single Fixture: operates in stand-alone mode independently
of other luminaires
Master: sends trigger signals to other luminaires, or
Synchronized: slave – receives trigger signals from other
luminaires.
No more than one luminaire may be the master. Any
luminaire on the link, regardless of its position, may be the
master. All other luminaires must be set as slaves.
Stand-alone
timer settings See ": If both the timer and the light-level trigger are used,
operation starts whenever it is darker than the light-level
setting, and within the times set." on page 45.
Stand-alone
light sensor
settings ": Setting a light-level trigger" on page 45.