LED status messages
73
9.2 LED status messages
The three-digit version number (
major.minor.build
) of the installed software is displayed by
the LEDs on power up. The number of:
• Red flashes in LED 1 indicates the major number, followed by,
• Green flashes in LED 2 to indicate the minor number, followed by,
• Red flashes in LED 2 to indicate the build number (only used for beta releases)
For example, if the software version is 1.3.0, LED 1 flashes red once and LED 2 flashes
green three times.
Appearance
Message, LED 1
Message, LED 2
Steady green
Effects OK
Data OK.
Steady red
-
Invalid data/no data
Steady yellow
Waiting for upload, or
upload in progress
Waiting for upload, or
upload in progress
Flashing yellow
Reset in progress
Reset in progress
Flashing red &
green
See message in display
or contact a service
technician
Off
-
No data detected
Table 5: LED status messages
Summary of Contents for Exterior 1200 Wash
