![background image](http://html.mh-extra.com/html/home-zone-security/es00735v/es00735v_installation-instructions_2150733001.webp)
LED Motion Activated Security Light
Model No. ES00735V
(888) 782-5618
IMPORTANT SAFETY OPERATING INSTRUCTIONS
1.
Please read all warning and instruction labels which are included in the box and fixture to avoid personal injury, property damage
caused by fire, cuts, bruises, death and other dangers.
2.
Please follow these general precautions before installing, maintaining, or fixing
1.
The light control requires 120 volt, 60 Hz power source.
2.
If you want to use Manual Mode, the control must be wired through a switch.
3.
Some codes require installation by a qualified electrician.
4.
This product is intended for use with the enclosed gasket and with a junction box marked for use in wet locations.
1. Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
2. Verify that the supply voltage is correct. Connect fixture to a 120 volt, 60 Hz power source.
3. Make sure all electrical and grounded connections are in accordance with the National Electrical Code and
any applicable local code requirements.
4. All wiring connections should be capped with UL listed wire connectors.
REQUIREMENTS
1.
Illumination output: approx. 2600 lumens / 5000K
2.
Sensor detect range: 70 feet x 180 degree
3.
Power source: AC120V/60Hz
REF. PARTS
PARAMETER:
s e c u r i t y
www.homezonesecurity.com
A: Light fixture x1pc
B: Mounting screws x4pcs
C: Wire connectors x2pcs
D: Mounting Bolt x1pc
E: Rubber Plug x1pc
F: Gasket x1pc
G: Mounting Strap x1pc
H: Wrench x1pc
I: Plastic Hanger x1pc
B
C
G
H
I
D
E
F