36
Exterior 1200 Wash user manual
5 . 1 . 2 S e t t i n g u p a l u m i n a i r e w i t h a n M P - 2
The Martin MP-2 Uploader can be connected to one or more luminaires. If multiple
luminaires are connected together to an MP-2, the settings applied will be sent to all the
luminaires.
Connecting an MP-2
To connect an MP-2 Uploader to an Exterior 1200 Wash:
1. Obtain an MP-2 (available from Martin Architectural, P/N 90758420) with a flash
memory card, and the Martin Uploader program (available free of charge from the
Martin website). Download the Exterior 1200 Wash luminaire software from the Martin
website as described in the Martin Uploader help file and MP-2 user manual.
2. Connect the MP-2 to the Exterior 1200 Wash using either an XLR connector
connected to the data link or the RJ-45 service socket in the connections compartment
behind the rear cover plate.
3. Apply power to the Exterior 1200 Wash and MP-2.
Configuring the Exterior 1200 Wash with the MP-2
on page 75 for a complete overview of the control menus
available for the Exterior 1200 Wash in the MP-2 Uploader.
DMX address
If you intend to use a DMX controller, you need to set the luminaire’s DMX address. If you
want a group of luminaires to respond identically and do not need individual control,
connect the MP-2 to all the luminaires in that group. The DMX address you set will be
given to all the luminaires.
If you are not familiar with the principles of DMX addressing in an installation with multiple
fixtures, see "
To set the DMX address, scroll through the MP-2 menus and select
F i x tu r e a dd r e s s
.
Enter a value between 1 and 505 (512 DMX channels are available in one DMX universe,
and the Exterior 1200 Wash uses 8 channels).
Figure 14: Connecting to an MP-2 Uploader
Summary of Contents for Exterior 1200 Wash
