38
Exterior 1200 Wash user manual
2. In the
P e r s on a l i ty
menu, scroll down to
S et c lo c k
.
3. Set the luminaire to the current time (expressed in the 24-hour clock in hours and
minutes) by entering values for
Ho u r
and
Mi n u t e
. Use the
Up
and
Down
buttons to
scroll values and
Enter
to confirm.
Luminaire settings
Luminaire settings are accessed in the
Pe r s on a l i ty
menu.
D M X L a m p O f f a n d D M X R e s e t s e t t i n g s
If DMX will be used to control the luminaire, it is a good idea to set the DMX Lamp Off and
DMX Reset options via
P e r so n a l it y
→
D M X L a m p O f f
and
P er s o n al i t y
→
D MX
R e s et
. These settings are described in "
7.1: Preparing for DMX control"
A u t o m a t i c l a m p o n
When
P e r so n a l it y
→
A u t o L a m p O n
is set to
O n
, the luminaire turns on the lamp
within 90 seconds of power on. Use this setting if you intend to run stand-alone shows.
When set to
O f f
(the default setting), a lamp-on command from the DMX controller is
required to turn on the lamp.
Summary of Contents for Exterior 1200 Wash
