Stand-alone programming with a PC and MUM
45
Automatically triggering stand-alone operation
Stand-alone operation can be set to a timer trigger that activates operation for one or two
periods in a 24 hour period, or set to a light-level trigger that uses a light sensor to activate
operation when ambient light is below a certain level.
If both the timer
and
the light-level trigger are used, operation starts whenever it is darker
than the light-level setting, and within the times set.
Setting a timer trigger
To set a timer trigger:
1. Make sure the correct time has been set on the luminaire’s built-in clock (see ": Clock"
2. Select
None
,
Timer 1
,
Timer 2
or
Both Timers
in the
Enable Timers
box.
3. Use the
Start Time
and
End Time
spin buttons to set a period of stand-alone
operation on the selected timer(s).
Setting a light-level trigger
To set a light-level trigger:
1. Set
Light level sensor trigger
to
On
.
2. Set the light level that triggers stand-alone operation using the
Trigger level
spin
button, or press
Capture current sensor value
to set the current ambient light level to
trigger stand-alone operation.
To avoid false triggering by sudden light changes caused by vehicle headlights or clouds,
for example), the light level must remain above or below the trigger threshold for 5
minutes to activate the trigger.
6 . 2 . 3 P r o g r a m m i n g e f f e c t s i n s c e n e s
The programming of effects is performed using the
Stand-Alone program
controls:
Summary of Contents for Exterior 1200 Wash
