48
Exterior 1200 Wash user manual
6.3 Stand-alone operation
6 . 3 . 1 S t a r t i n g s h o w p l a y b a c k a u t o m a t i c a l l y a t
l u m i n a i r e p o w e r - o n
Execution of the pre-programmed scenes in a loop will automatically resume when the
luminaire is powered on if stand-alone operation and the automatic lamp-on function are
enabled by one of the following three methods:
Using MUM:
• Stand-alone operation in the Stand-alone settings window
• Auto LampOn In the Fixture Settings window
Using an MP-2:
•
S t an d A lo n e
→
E n a bl e S A
•
P e rs o n a li t y
→
A u t o l a m p o n
.
Using the onboard control panel:
•
S t an d a l on e
→
E n a b le
•
P e rs o n a li t y
→
A u t om a t i c L a m p O n
.
6 . 3 . 2 D M X c o n t r o l l e r o v e r r i d e d u r i n g s t a n d - a l o n e
s h o w p l a y b a c k
If an Exterior 1200 Wash is connected to a DMX controller and receives DMX signals
during show playback, the stand-alone show will stop running and the luminaire will
respond to the DMX controller. DMX signals always have priority over the running of a
stand-alone show.
Summary of Contents for Exterior 1200 Wash
