F5 3D Imaging System User Manual
78
Point Toolbar
Figure 64: Point Toolbar
Chooses a point according to the current selection
Chooses a point by three planes
Line Toolbar
Figure 65: Line Toolbar
Creates a line by two points
Creates a line by two planes
Plane Toolbar
Figure 66: Plane Toolbar
Creates a plane by point sets
Creates a plane with two planes
Radius
Defines the preferred radius of point selections.
Offset
Adjusts a selected plane’s position.
Circle Toolbar
Figure 67: Circle Toolbar
Selects a circle by three points
Selects a circle by a point and a diameter
Defines the diameter of a circle using the Circle field
Angle