F5 3D Imaging System User Manual
64
Figure 55: Register with Next Option
2
Use the toggle buttons to select the two overlapping segments.
Figure 45: Segment Registration Toggle Buttons
3
Now, align the chosen segments using either the Manual Alignment or
Three-point Alignment mode. For more details about Manual mode, you may
refer to the Manual Alignment section on page 65. For more details about
Three-point Alignment mode, you may refer to the Three-point Alignment
section on page 67.
Adjusting Point Filters
The adjustment of point filters is optional.
►
To discard unwanted or problematic points before starting
Segment Registration:
1
In the Stitching window, select the Point Filter tab.
2
Set the preferred values in the Distance (in millimeters) and Accuracy
Thresholds by either entering a number in the field or dragging the relevant
scroll bar.
NOTE
The Reference Segment point cloud is displayed in Blue.
The Selected Segment point cloud is displayed in Light Yellow.
