F5 3D Imaging System User Manual
63
Controlled stitching enables you to perform parts of the stitching process
semi-manually in the KaplaVision user interface, such as segment alignment,
editing, segment or frame deletion.
Open the file in the Stitching window, as described on page 54.
Starting Automatic Registration
After the 3D video file has been opened in the Stitching window, start the
Automatic Registration process by clicking the Sequential Registration button in
the Main tab.
Figure 43: Stitching Window − Automatic Registration
in case that the sequential registration didn’t provide the sufficient result, you can
click the Segment Registration button.
Segment Registration
During the Automatic Registration (stitching) process, the KaplaVision aligns each
frame to the frame preceding it. When the KaplaVision recognizes a possible
misalignment between frames, it breaks into a new segment (grouping). This
results in one or more segments.
Segment Registration is the process of manipulating the position of two-point
cloud segments into alignment for registration. The following sections describe
the steps of the process, including the various options offered in the Stitching
window for registration.
►
To select two segments for registration:
1
In the Stitching window, select the Segment Registration tab.
Figure 44: Stitching Window – Segment Registration Tab
