F5 3D Imaging System User Manual
27
You may refer to Chapter 4, Advanced
–
Stitching Tool on page 53 for
instructions on how to use the T4 application, which provides more advanced
stitching tools. For example, to stitch multiple videos together or to stitch
multiple video segments together.
12.
[Optional]
Denoising – You can decrease the noise level of MPC file by Right
clicking the MPC file in the File Explorer and select the Denoise option.
A success message is displayed after the process is completed. This can also be
done even after the file has been stitched. A new file is created in the same
folder as the MPC file and the string _denoise is appended to the end of the file
name.
If you selected the Clean Point Cloud Recording mode, then the denoising process
is performed automatically. In this case, you can skip this step and go directly to
step 13.
13.
[Optional]
Surfacing (Meshing) – You can surface an MPC file by clicking the
Surfacing (Meshing) button
.This can also be done even after the file has been
stitched. A new file is created in the same folder as the MPC file and the string
_surfaced is appended to the end of the file name. You may refer to the Surfacing
(Meshing) section on page 49 for more information.
14.
[Optional]
Exporting – You can export a KaplaVision point cloud to a variety of
external formats, as described on page 47.