F5 3D Imaging System User Manual
23
NOTES
All of the color associated options are disabled as the F5-B only produces IR image.
The last three options stitch a single MPC file. To stitch multiple MPC files together,
you may refer to Chapter 4, Advanced –Stitching Tool, page 53.
You can also use the Advanced Stitching tool if the result of automatic stitching does
not provide sufficient quality. In this case, open the MPC file (without the _stitched
extension) in the Advanced Stitching tool.
Some of these Recording options perform a sequence of tasks, such as decoding,
stitching and then denoising using default settings. Each of these tasks can be
performed separately (and with more control) using the relevant tools, as described
in the Toolbars section on page 56.
7.
Click the Rec recording button
at the bottom of the KaplaVision window to
start scanning, according to the selected Recording Mode.
Alternatively, you can press the F5-B Record/Stop Trigger once to start scanning.
Figure 6: Start / Stop Button
While the Imager is recording, the Record/Stop button on the screen changes to
show a square
.
As soon as you start recording, a folder is automatically created in the File
Explorer containing the Output0.mis (infrared image) and Output1.mis (color
image) files.
Record/Stop
Button
