F5 3D Imaging System User Manual
110
2
Click the Choose a plane by two planes option on the Plane toolbar.
3
Define the floor of the room as a plane.
4
Press Enter. The floor’s plane is defined.
5
Define the adjacent wall of the room as a plane.
6
Press Enter. The adjacent wall’s plane is defined.
7
Press Enter. The wall perpendicular to the two planes is displayed as a plane.
8
Click the Offset button repeatedly to adjust the plane’s position.
9
The plane is translated in steps of a size given by the value in the Offset Value
field. Adjust the step size by typing in a different value. Use a minus sign
(negative value) to move in the opposite direction.
Managing Measurements and Views
This section describes how to save or discard a measurement.
►
To save a measurement:
After performing any of the measurements (before selecting a new function),
press Enter to save the measurement in the History and Primitives panes. It is
possible to use measurements saved in the History pane instead of defining
new geometric primitives.
►
To discard a measurement:
Press Esc to discard a measurement at any time. Selecting a different
measurement discards previous work as well.
►
To define the measurement unit:
Select a measurement unit (mm/in) from the Measurement Units
dropdown list.
