F5 3D Imaging System User Manual
48
Figure 26: Setting of the Exporting Configuration
2
Fill out the fields of this window, as follows:
Select Source MPC File: Specify the MPC file to be exported.
Select path to export to: Specify the destination to which to export
the MPC file.
Select base file name: specify the name of the altered file
Export MPC File to: Select the format to which to export the MPC file.
Fill in the other fields in the window. These fields differ according to the
format to which you are exporting.
Camera space: saves each point in the dimensions taken by the
camera.
Single File per Frame: when checked generate for each frame a single
file
Ignore normal-less points
3
Click the Start button to start exporting the file. A message displayed at the
bottom of the window when exporting is completed.
4
Click the Close button.
