Mantis Vision F5-B User Manual Download Page 69

Page: 69 / 126

F5 3D Imaging System User Manual

The Running Segment Registration window opens and closes.

Figure 53: Running Segment Registration Window

If Registered is displayed on the toolbar, click Merge to complete the

registration and combine the segments.

If Not Registered is displayed, align the segments more precisely and try
again.

Figure 54: Toolbar Display – Registered vs. Not Registered

NOTE

An override option enables you to merge two segments should segment
registration fail. If Not Registered is displayed, but you want to merge
segments anyway, click Merge. A window opens. Click Yes to continue or
No to cancel.

Figure 55: Segment Registration Failed

Repeat this procedure until all segments in the Segments tab are merged into

a single segment.

Summary of Contents for F5-B































































































































Search results

Summary of Contents for F5-B

Reviews:

Related manuals for F5-B

Brands by name

Popular brands

Mantis Vision F5-B, User Manual

Search results

Summary of Contents for F5-B

Reviews:

Related manuals for F5-B

Brands by name

Popular brands