F5 3D Imaging System User Manual
87
5
Click the
icon to toggle the cut plane view on and off.
Defining a Cut Plane Perpendicular to Two
Planes
This option defines a cut plane that is perpendicular to two other planes.
Using Points to Create the Planes
►
To use points to create the planes:
1
Click the Define
button and select Define Cut Plane.
2
Begin setting the first plane by double-clicking a point in the point cloud. The
software automatically detects and highlights neighboring co-planar points in
the plane located at a distance smaller than defined in the Radius field (refer
to the Managing Measurements and Views section on page 110).
– OR –
Instead of defining a new point, select a previously defined point by
double-clicking the entry in the Primitives or History panes.
3
Press Shift + Enter to accept the co-planar selection.
Figure 81: Defining the First Plane
4
Repeat steps
2
and
3
over different regions of the plane until the required
points are selected.
