19
Connecting the Touch Screen
7
After mounting on the monitor, connect the Touch Screen.
7.1
Requirements
Connect the Touch Screen according to the design engineers’ plans, and the requirements and
recommendations stipulated in the Lumio
Design
Guide for Integrators
.
Touch Screen
assembly includes:
•
Mounting the PCB Controller on the Monitor below
•
Connecting the Sensors to the PCB Controller on page 20
•
Connecting the LED PCB Wire to the PCB Controller on page 24
•
Connecting the System’s Power Source on page 26
7.2
Mounting the PCB Controller on the Monitor
The position of the PCB Controller on the monitor is determined by the integration design. (The type of PCB
Controller depends on system requirements. For different types of PCB Controllers, see the Lumio
Design Guide
for Integrators
)
.
To mount the PCB Controller onto the monitor:
1.
Match the serial numbers on the labels of the PCB Controller and Touch Screen.
2.
Mount the PCB Controller on the monitor.
3.
Screw the PCB Controller into place.
The following picture displays a PCB Controller HV.
Figure 8 PCB Controller HV
